Tuesday, December 11, 2012
*Elias Snow Buddies*
6:54 AM | 
Posted by
ShastaMarie (aka Heidi)
Elias Snow Buddies
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Elias Chatzoudis
Which you must obtain a license to use a
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Elias Chatzoudis
Which you must obtain a license to use a
Scrap Kit "Snow Buddies" By: Ditzy
You can purchase this awesome kit on her blo
Template By: ShastaMarie (myself)
You can get this template at my blog he
Don't forget to leave a thank you when downloading each item
Plugins Used: Xero Raidence
<(^_^)>
Papers Used:
paper 1
paper 2
paper 8 (x2)
paper3
paper 6 (x2)
paper 9
paper 5
Elements Used:
Frame 3
Swirl 2
Christmas Bow 2
Lights 1
Snowman 2
Winter Bear 1
Ornament 2
Mittens
Christmas Bow 1
Bear
Sparkle Trail
Ok Lets Get Started:
open up template - shift+d - x out original template
On new template copy and paste frame 3 into your image
move to bottom layer under template and move to the right
side of your template so it shows at least 2 windows
Use magic tool - hold down shift key - click inside each window
modify - expand 10 - copy and past paper of choice into
windows - I used paper 5 - selections - invert - delete - selections - select none
Click on layer 1 - selections - select all - selection - float - selection - defloat
paste a paper of choice from the kit - I used paper 1
selection - invert - delete - selection - select none - delete original layer
paste a paper of choice from the kit - I used paper 1
selection - invert - delete - selection - select none - delete original layer
Click on layer 2 - selections - select all - selection - float - selection - defloat
paste a paper of choice from the kit - I used paper 2
selection - invert - delete - selection - select none - delete original layer
paste a paper of choice from the kit - I used paper 2
selection - invert - delete - selection - select none - delete original layer
Click on layer 3 - selections - select all - selection - float - selection - defloat
paste a paper of choice from the kit - I used paper 8
selection - invert - delete - selection - select none - delete original layer
paste a paper of choice from the kit - I used paper 8
selection - invert - delete - selection - select none - delete original layer
Click on layer 4 - selections - select all - selection - float - selection - defloat
paste a paper of choice from the kit - I used paper 3
selection - invert - delete - selection - select none - delete original layer
paste a paper of choice from the kit - I used paper 3
selection - invert - delete - selection - select none - delete original layer
Click on layer 6 - selections - select all - selection - float - selection - defloat
paste a paper of choice from the kit - I used paper 6
selection - invert - delete - selection - select none - delete original layer
paste a paper of choice from the kit - I used paper 6
selection - invert - delete - selection - select none - delete original layer
Click on layer 7 - selections - select all - selection - float - selection - defloat
paste a paper of choice from the kit - I used paper 9
selection - invert - delete - selection - select none - delete original layer
paste a paper of choice from the kit - I used paper 9
selection - invert - delete - selection - select none - delete original layer
Click on layer 8 - selections - select all - selection - float - selection - defloat
paste a paper of choice from the kit - I used paper 5
selection - invert - delete - selection - select none - delete original layer
paste a paper of choice from the kit - I used paper 5
selection - invert - delete - selection - select none - delete original layer
Click on layer 10 - selections - select all - selection - float - selection - defloat
paste a paper of choice from the kit - I used paper 6
selection - invert - delete - selection - select none - delete original layer
paste a paper of choice from the kit - I used paper 6
selection - invert - delete - selection - select none - delete original layer
You can use this layer if you want to. After I got my tag done I didnt
like the layer there so I deleted it. So up to you if you want to use this layer
Click on layer 9 - selections - select all - selection - float - selection - defloat
paste tube of your choice - I used Elias
selection - invert - then use your eraser tool to erase the area below the circle
paste tube of your choice - I used Elias
selection - invert - then use your eraser tool to erase the area below the circle
frame so that your tube looks like its coming out of the circle
Use your Xero Raidence setting to set it to what you like
I usually go thru them til I find one I like
You can add a drop shadow if you like to your tube
Click on layer 7 - selections - select all - selection - float - selection - defloat
paste apart of you tube in the circles - I used the snowman of the tube
selection - invert - delete - selection - select none
paste apart of you tube in the circles - I used the snowman of the tube
selection - invert - delete - selection - select none
You will have to do this twice for each circle so they are both the same
Add a drop shadow if you like
Placing Elements:
This is where you get CREATIVE with your tags
Not all tags will look the same as everyone used different elements from a kit
Please use mine for a reference tag
Open up your Swirl 2 element and resize to your liking and move to the top of layer 1
I paced mine twice and used my flip and mirror tool to get them where I wanted them
Open up your light 1 - resize - move to the top of your tag and place at the bottom of your tube. At the bottom of the circle
Open up Christmas Bow 2 - resize - move to the bottom of the tube/circle in the middle
Open up Snowman 2 - resize - move him to the left hand side of your tag
he will look like he has fell down...lol Silly Snowman
Open up Winter Bear 1 - resize - move to the right hand side of your tag
Make him look like he is sitting on the swirls
Open up Ornament 2 - resize - move to the right hand side of your tag
make your ornament look like it hanging from the large right circle
Open up your Mittens - resize - move the to the left hand side of your tag
Move them up to the top swirl. make them hang from the middle of the swirl
Open up Christmas Bow 1 - resize - move this bow to where the mittens are
place this bow in the middle of the swirl also. This is the bow for the mittens
Open up Bear - resize - move him to the top of your tag so he is sitting ontop
of the frame window
Open up Sparkle Trail (x2) and move them to where you would like them. I placed
one on the right and one on the left. The one on the left I just flipped and mirrored it
Next add drop shadows to where you would like
I used them on the glitter parts and all on the element layers
My settings were 0-0
Its up to you where you would like to use them
Place your name where you would like it
Add the ©Copyright Info and your License Number for the tube
Add the ©Copyright Info and your License Number for the tube
Now merge all your layers and save to your pc as a png file.
This tutorial was created on December 11, 2012 by ShastaMarie
Any resemblance to another Tag or Tutorial is purely coincidental
Any resemblance to another Tag or Tutorial is purely coincidental
If you have any trouble with this tutorial send me an email at sweeshasta@gmail.com and I will be glad to help you out.
Would like to see your creations so send me some
<(^_^)>
Friday, October 19, 2012
* Harvest Fall VeryMany *
3:42 PM |
Posted by
ShastaMarie (aka Heidi)
Harvest Fall VM
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
Which you must obtain a license to use at
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
Which you must obtain a license to use at
Scrap Kit "Magical Fall" By: Ditzy
You can purchase this awesome kit on her blog
Template By: AK designs
You can get this template here
Don't forget to leave a thank you when downloading each item
Plugins Used:
Xero - Fritillary
Tramages - Tow The Line
(^_^)
Elements Used:
Sun 1
Branch 2
Scarecrow & Pumpkin
Bow 3
Wordart
Bug 1
Watering Can
Sparkles if you have them
Papers Used:
Paper 10
Paper 1
Paper 7
Paper 4
Paper 3
Paper 8
Paper 9
Paper 5
Paper 6
Glitter Frames:
Click on them to open up to original size
then right click and save to your pc.
Ok Lets get started:
Open up template and resize all layers to 800 x 756 (pixel)
Click on rectangle layer - selections - select all - selection - float - selection - defloat
paste a paper of choice from the kit - I used paper 10
selection - invert - delete - selection - select none - delete original layer
paste a paper of choice from the kit - I used paper 10
selection - invert - delete - selection - select none - delete original layer
Open up your rectangle glitter frame and copy and paste into image and place on top of the bottom rectangle.
Click on strip layer - selections - select all - selection - float - selection - defloat
paste a paper of choice from the kit - I used paper 1
selection - invert - delete - selection - select none - delete original layer
paste a paper of choice from the kit - I used paper 1
selection - invert - delete - selection - select none - delete original layer
Click on circle layer - selections - select all - selection - float - selection - defloat
paste a paper of choice from the kit - I used paper 7
selection - invert - delete - selection - select none - delete original layer
paste a paper of choice from the kit - I used paper 7
selection - invert - delete - selection - select none - delete original layer
Open up ypur circle glitter frame and copy and paste into image and move to the top of the circle.
Click on strip layer - selections - select all - selection - float - selection - defloat
paste a paper of choice from the kit - I used paper 4
selection - invert - delete - selection - select none - delete original layer
paste a paper of choice from the kit - I used paper 4
selection - invert - delete - selection - select none - delete original layer
Click on large flower layer - selections - select all - selection - float - selection - defloat
paste a paper of choice from the kit - I used paper 3
selection - invert - delete - selection - select none - delete original layer
paste a paper of choice from the kit - I used paper 3
selection - invert - delete - selection - select none - delete original layer
Next add the Xero Fritillary to the flower - settings 5-30-30-50
Click on large flower layer - selections - select all - selection - float - selection - defloat
paste a paper of choice from the kit - I used paper 3
selection - invert - delete - selection - select none - delete original layer
paste a paper of choice from the kit - I used paper 3
selection - invert - delete - selection - select none - delete original layer
Next add the Xero Fritillary to the flower - settings 5-30-30-50
On the squares I rotated my papers before I copied and pasted them to give them and angle look. You can keep them straight if you want to.
Click on square layer - selections - select all - selection - float - selection - defloat
paste a paper of choice from the kit - I used paper 8
selection - invert - delete - selection - select none - delete original layer
paste a paper of choice from the kit - I used paper 8
selection - invert - delete - selection - select none - delete original layer
Next use your magic tool and click inside the green lines and add noise to it to make it have a glitter effect. Before you select none make sure you add a drop shadow 0-0 settings to it then select none
Click on square layer - selections - select all - selection - float - selection - defloat
paste a paper of choice from the kit - I used paper 8
selection - invert - delete - selection - select none - delete original layer
paste a paper of choice from the kit - I used paper 8
selection - invert - delete - selection - select none - delete original layer
Next use your magic tool and click inside the yellow lines and add noise to it to make it have a glitter effect. Before you select none make sure you add a drop shadow 0-0 settings to it then select none
Click on banner layer - selections - select all - selection - float - selection - defloat
paste a paper of choice from the kit - I used paper 9
selection - invert - delete - selection - select none - delete original layer
paste a paper of choice from the kit - I used paper 9
selection - invert - delete - selection - select none - delete original layer
Next add the Xero Fritillary to the flower - settings 5-30-30-50
Click on small flower layer - selections - select all - selection - float - selection - defloat
paste a paper of choice from the kit - I used paper 5
selection - invert - delete - selection - select none - delete original layer
paste a paper of choice from the kit - I used paper 5
selection - invert - delete - selection - select none - delete original layer
Do the same action above again but this time copy and paste your tube into the flower
Click on small flower layer - selections - select all - selection - float - selection - defloat
paste a paper of choice from the kit - I used paper 5
selection - invert - delete - selection - select none - delete original layer
paste a paper of choice from the kit - I used paper 5
selection - invert - delete - selection - select none - delete original layer
Do the same action above again but this time copy and paste your tube into the flower
Click on small small flower layer - selections - select all - selection - float - selection - defloat - paste a paper of choice from the kit - I used paper 6
selection - invert - delete - selection - select none - delete original layer
selection - invert - delete - selection - select none - delete original layer
Click on small small flower layer - selections - select all - selection - float - selection - defloat - paste a paper of choice from the kit - I used paper 6
selection - invert - delete - selection - select none - delete original layer
selection - invert - delete - selection - select none - delete original layer
Copy and paste sun into your image - resize- and move to behind the circle up to the right of your tag.
Copy and paste branch into your image - resize -and move to the top of the squares - mirror the image
Copy and paste scarecrow & pumkin into your image - resize- and move towards the bottom right of your tag
Copy and paste bow into your image - resize - and move to the top small small flower to the right and center it in the flower
Copy and paste your tube into your image - resize - move to where you like it - add drop shadow
Copy and paste wordart into your image - resize - move to the bottom of your tube
Copy and paste bug into your image - resize - move to the top of the left square
Copy and paste watering can into your image - resize - move to behind the wordart and to the left of your image
Copy and paste small flower from potted flower ( I used my freehand tool to make a circle around the top flower then copied and pasted it into my image) Copy 2 flowers and move them to the center of both small small flowers
Copy and paste sparkles into your image if you have them
Place your name where you would like it
Add the ©Copyright Info and your License Number for the tube - Now merge all your layers and save to your pc as a png file
Add the ©Copyright Info and your License Number for the tube - Now merge all your layers and save to your pc as a png file
This tutorial was created on October 19, 2012 by ShastaMarie
Any resemblance to another Tag or Tutorial is purely coincidental
Any resemblance to another Tag or Tutorial is purely coincidental
If you have any trouble with this tutorial send me an email at sweeshasta@gmail.com and I will be glad to help you out
Would like to see your creations so send me some
<(^_^)>
Sunday, October 7, 2012
* Love Hurtz - Verymany *
7:08 AM |
Posted by
ShastaMarie (aka Heidi)
Love Hurtz VM
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
Which you must obtain a license to use at
Scrap Kit "Flower Pot Kids" By: Ditzy
You can purchase this awesome kit on her blog
Template By: ShastaMarie (myself)
You can get this template at Glitter Creationz here
Don't forget to leave a thank you when downloading each item
Plugins Used: Xero Raidence
(^_^)
Ok Lets get Started:
Elements Used:
Bow2
Bee2
Flower1
Sparkles (not included)
Papers Used:
Paper14
Paper15
Paper16
Paper17
Paper18
Paper20
Open template - Shift D to duplicate then close out original template
Delete info layer - stars (you can use stars if you want to)
Delete info layer - stars (you can use stars if you want to)
Click on pink circle layer - selections - select all - selection - float - selection - defloat
paste a paper of choice from the kit - I used paper 14
selection - invert - delete - selection - select none
paste a paper of choice from the kit - I used paper 14
selection - invert - delete - selection - select none
Repeat above action a 2nd time as you need 2 blue circles. Once you have 2 blue circles click on the bottom circle and - adjust - blur - gaussian blur - settings 10
Click on left pink rectangle layer - selections - select all - selection - float - selection - defloat - paste a paper of choice from the kit - I used paper 15
selection - invert - delete - selection - select none - delete the original layer
selection - invert - delete - selection - select none - delete the original layer
Click on light pink square layer - selections - select all - selection - float - selection - defloat - paste a paper of choice from the kit - I used paper 16
selection - invert - delete - selection - select none - delete the original layer
selection - invert - delete - selection - select none - delete the original layer
Click on right pink rectangle layer - selections - select all - selection - float - selection - defloat - paste a paper of choice from the kit - I used paper 17
selection - invert - delete - selection - select none - delete the original layer
selection - invert - delete - selection - select none - delete the original layer
Click on white square layer - selections - select all - selection - float - selection - defloat
paste a paper of choice from the kit - I used paper 18
selection - invert - delete - selection - select none - delete the original layer
paste a paper of choice from the kit - I used paper 18
selection - invert - delete - selection - select none - delete the original layer
Click on light pink circle layer - selections - select all - selection - float - selection - defloat - paste a paper of choice from the kit - I used paper 20
selection - invert - delete - selection - select none - delete the original layer
selection - invert - delete - selection - select none - delete the original layer
Now time to add your tube.
Click on top circle layer - selections - select all - selection - float - selection - defloat - paste tube of your choice - resize - move to the right side of circle - selection - invert - delete - selection - select none
Next color the words "Love Hurtz" by using your paint can -
you can use any color you want - I used orange
Next open up your elements that you want to use. I used: Blue Bow2 - Bee2 - Flower1 - you can choose any elements that you want to use. Resize them to what you want. I used mainly the 50% resize. place them where you would like. Use my tag as a guide.
Next add drop shadows to where you would like. I used them on the glitter frames and a couple layers. Its up to you where you would like to use them.
Place your name where you would like it - I placed mine to the right over the word art.
Add the ©Copyright Info and your License Number for the tube
Add the ©Copyright Info and your License Number for the tube
Now merge all your layers and save to your pc as a png file.
This tutorial was created on October7, 2012 by ShastaMarie
Any resemblance to another Tag or Tutorial is purely coincidental
Any resemblance to another Tag or Tutorial is purely coincidental
If you have any trouble with this tutorial send me an email at
sweeshasta@gmail.com and I will be glad to help you out.
Would like to see your creations so send me some
(^_^)
Monday, October 1, 2012
* Gone Fishing *
2:32 PM |
Posted by
ShastaMarie (aka Heidi)
Gone Fishing
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Scrap Kit "Gone Fishing" By: Ditzy
You can purchase this awesome kit on her blog
Supplies Needed:
Scrap Kit "Gone Fishing" By: Ditzy
You can purchase this awesome kit on her blog
Plugins Used: Gaussian Blur & Overlay
Supplies are listed below - Word Art
Just right click and save to your pc
(^_^)
This tag is going to be an all elements tag -
u can use as many as you like in the tag or you can go by my tag for an idea.
Ok Lets get Started:
Elements Used:
(resize these to your liking as everyone likes different sizes)
Water
Boat
Bear w/ Bucket
Sailboat
Fish
Fishnet
Sun
Clouds
Bauble
Bait
Gecko
Sparkles
Open up a new image 800 x 800 for a good working area
Copy and paste water into image 2 times
Move them towards the bottom
Make them look like a big puddle
Next copy and paste boat into your image - resize -
and move boat on top of the water - use my tag as a guide
Next copy and paste fishnet into your image - resize -
move to be on top of boat - use my tag as a guide
Next copy and paste bear into your image -
move him to stand in the puddle of water - use my tag as a guide
Next copy and paste sailboat into your image - resize -
move towards the bottom of the puddle - use my tag as a guide
Next copy and paste as many fish as you want in your puddle - resize -
I also used a fish to go on the end of the bear's fishing pole - use my tag as a guide
Next copy and paste baulber into your image - resize -
move to the bear's left pocket - use my tag as a guide
Next copy and paste bait into your image - resize -
move the the bear's right pocket - use my tag as a guide
Next copy and pase gecko into your image - resize -
move to the top of his hat - use my tag as a guide
Next copy and paste sun into your image - resize -
move the sun to the back of the image and place behind the bear's left ear - use my tag as a guide
Next copy and paste clouds into your image - resize -
place them on top of the sun like they are floating - use my tag as a guide
After you have gotten all your elements place where you want them and resized -
MERGE your layers. Resize the image only 80%
Copy and paste your image into a new image by hitting ctrl v
and it will open your image in a new image -
then copy another image again so you have 2 images of the same tag.
Next click on the bottom layer and go to Adjust - Blur - Gaussian Blur - settings 2
Next click on the top layer and make this layer and overlay.
Once you have done both layers with the blur and overlay - MERGE layers again
Next select the FishTales word art and place it into your image - resize -
move it to where the clouds and sun are - use my tag as a guide
Next copy and paste the other word art into your tag - resize -
move it to where you would like it,
it doesnt have to be where I placed mine but you can use my tag as a guide
Now Place your name where you would like it to be
and add gradient glow with a drop shadow if you like
Add the ©Copyright Info to your tag.
The info you need to use for this tag is this:
(when using just a scrap kit you need to credit the maker of the kit)
©2bestiez2scrapz www.2bestiez2scrapz.blogspot.com
Merge Layers again and save as a PNG file to your pc
This tutorial was created on October 1, 2012 by ShastaMarieE
Any resemblance to another Tag or Tutorial is purely coincidental
Any resemblance to another Tag or Tutorial is purely coincidental
If you have any questions please email me at sweetshasta@gmail.com
and I will be glad to help you out.
Would also like to see your great creations so send me some
(^_^)
Saturday, September 29, 2012
* Emo Funk VeryMany *
5:24 PM |
Posted by
ShastaMarie (aka Heidi)
Emo Funk VeryMany
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
Which you must obtain a license to use at
Scrap Kit "Emo Funk" By: Ditzy
You can purchase this awesome kit on her blog
Template By: Toxic Desirez
You can get this template on her blog
Don't forget to leave a thank you when downloading each item
Plugins Used: Xero Raidence
Supplies are listed below - Glitter Frames - DropShadow already on them
(^_^)
Ok Lets get Started:
Open template - Shift D to duplicate then close out original template
Delete info layer
On the template I merged each of the layers seperately to make them easier to work with.
So instead of having 11 layers to work with I only had 6.
Its up to you the way you want to do the layers.
Click on black layer - selections - select all - selection - float - selection - defloat
paste a paper of choice from the kit - I used paper 5
selection - invert - delete - selection - select none - delete the original layer
paste a paper of choice from the kit - I used paper 5
selection - invert - delete - selection - select none - delete the original layer
Repeat above for 2nd square if you didnt merge them
Open up orange Glitter Frame 1 -
copy then paste it into image and move it over the top of the squares.
Click on white layer - selections - select all - selection - float - selection - defloat
paste a paper of choice from the kit - I used paper 4
selection - invert - delete - selection - select none - delete the original layer
paste a paper of choice from the kit - I used paper 4
selection - invert - delete - selection - select none - delete the original layer
Repeat above for 2nd square if you didnt merge them
Open up green Glitter Frame 2 -
copy then paste it into image and move it over the top of the squares.
Click on medium grey layer - selections - select all - selection - float - selection - defloat
paste a paper of choice from the kit - I used paper 1
selection - invert - delete - selection - select none - delete the original layer
paste a paper of choice from the kit - I used paper 1
selection - invert - delete - selection - select none - delete the original layer
Repeat above for 2nd square if you didnt merge them
Open up blue Glitter Frame 3 -
copy then paste it into image and move it over the top of the squares.
Click on light grey layer - selections - select all - selection - float - selection - defloat
paste a paper of choice from the kit - I used paper 3
selection - invert - delete - selection - select none - delete the original layer
paste a paper of choice from the kit - I used paper 3
selection - invert - delete - selection - select none - delete the original layer
Repeat above for 2nd square if you didnt merge them
Open up purple Glitter Frame 4 -
copy then paste it into image and move it over the top of the squares.
Click on darl grey layer - selections - select all - selection - float - selection - defloat
paste a paper of choice from the kit - I used paper 6
selection - invert - delete - selection - select none - delete the original layer
paste a paper of choice from the kit - I used paper 6
selection - invert - delete - selection - select none - delete the original layer
Add a Gridient glow to the squares after - add small drop shadow - 0 - 0 settings
Next open up your rose element - resize to your liking - copy and paste into your tag -
move to the right side of your tag - use my tag as a guide
Next open up your swirl 3 element - resize to your liking - copy and paste into your tag -
mirror image - move to the left side of your tag - use my tag as a guide
Click on black circle layer - selections - select all - selection - float - selection - defloat
paste a paper of choice from the kit - I used paper 7
selection - invert - delete - selection - select none - delete the original layer
paste a paper of choice from the kit - I used paper 7
selection - invert - delete - selection - select none - delete the original layer
Click on circle layer again - selections - select all - selection - float - selection - defloat
paste tube of your choice inside circle - I used VeryMany tube -
paste tube of your choice inside circle - I used VeryMany tube -
move to the right of the circle - selection - invert - delete - selection - select none -
add a drop shadow if you like
Open up orange Glitter Frame 5 -
copy then paste it into image and move it over the top of the squares.
Next open up the emo girl 2 - resize to your liking - copy and paste into your tag -
place to the right side of your tag - use my tag as a guide
Next open up heart 2 and heart 3 - resize to your liking - copy and paste into your tag -
move to the right side of the circle - use my tag as a guide
Next copy and paste your tube again - resize to your liking - copy and paste into your tag -
move to the left side of your tag - use my tag as a guide
Next open up your ribbon 3 element - resize to your liking - copy and paste into your tag -
move to the bottom of the circle - use my tag as a guide
Next open up your sad teddy 2 - resize to your liking - copy and paste into your tag -
move to the right side of your tag - use my tag as a guide
Next open up your bow 5 - resize to your liking - copy and paste into your tag -
move to the left side of your tag up top - use my tag as a guide
Next open up your snake - resize to your liking - copy and paste into your tag -
move to the left side of your tag - use my tag as a guide
Next open up your sneaker - resize to your liking - copy and paste into your tag -
move to the right side of your tag - use my tag as a guide
Next open up your sparkles - resize to your liking - copy and paste into your tag -
move the sparkles to like go around the circle but make sure they are on top -
do this 2 times but make sure you flip the 2nd set of sparkles
Next look at your tag and make sure you are happy with it -
you can add more elements if you want to -
you can also add drop shadows to the layers that you want
Merge your layers - Resize to what you want it to be - I resized mine 80%
Place your name where you like it
Add the ©Copyright Info and your License Number for the tube
Merge Layers again then save as PNG file to your pc
Add the ©Copyright Info and your License Number for the tube
Merge Layers again then save as PNG file to your pc
This tutorial was created on September 29, 2012 by ShastaMarie
Any resemblance to another Tag or Tutorial is purely coincidental
Any resemblance to another Tag or Tutorial is purely coincidental
If you have any trouble with this tutorial
send me an email at sweeshasta@gmail.com and I will be glad to help you out.
Would like to see your creations so send me some
(^_^)
Wednesday, September 5, 2012
* Prettie Kittie Elias*
8:11 AM |
Posted by
ShastaMarie (aka Heidi)
Pretty Kitty Elias
This tutorial is written for those with knowledge of PSP
I wrote this tutorial using psp9
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Elias Chatzoudis
Which you must obtain a license to use at
Scrap Kit "KrazyKitties" By: KittzKreationz
You can download this awesome kit on her blog
Template 181 By: Toxic Desirez
You can get this template on her blog
Don't forget to leave a thank you when downloading each item
Plugins Used: Xero Raidence
Supplies are listed below - Glitter frames - No DS on them
Just click for original size then right click and save to your pc
Ok Lets get Started:
(^_^)
Open template - Shift D to duplicate then close out original
Canvas size 900 x 800 (to give you a good working area)
I always like a large area to work in
Delete copyright info
Delete copyright info
Click on yellow circle - selections , select all , float , defloat
paste a paper of choice from the kit - I used paper 3
selection invert delete
select none delete the original layer
paste a paper of choice from the kit - I used paper 3
selection invert delete
select none delete the original layer
Click on yellow circle - selections , select all , float ,defloat
paste a paper of choice from the kit - I used paper 3
selection invert delete
select none delete the original layer
paste a paper of choice from the kit - I used paper 3
selection invert delete
select none delete the original layer
Add the white glitter Frame layer from the supplies - add a DS if you like
Click on green square - selections , select all , float , defloat
paste a paper of choice from the kit - I used paper 5
selection invert delete
select none delete the original layer
paste a paper of choice from the kit - I used paper 5
selection invert delete
select none delete the original layer
Click on green square - selections , select all , float , defloat
paste a paper of choice from the kit - I used paper 5
selection invert delete
select none delete the original layer
paste a paper of choice from the kit - I used paper 5
selection invert delete
select none delete the original layer
Add the green glitter frame layer from the supplies - add a DS if you like
Click on pink square - selections , select all , float , defloat
paste a paper of choice from the kit - I used paper 6
selection invert delete
select none delete the original
paste a paper of choice from the kit - I used paper 6
selection invert delete
select none delete the original
Click on pink square - selections , select all , float , defloat
paste a paper of choice from the kit - I used paper 6
selection invert delete
select none delete the original layer
paste a paper of choice from the kit - I used paper 6
selection invert delete
select none delete the original layer
Add the blue glitter frame layer from the supplies - add a DS if you like
Click on blue square - selections ,select all , float , defloat
paste a paper of choice from the kit - I used paper 2
selection invert delete
select none delete the original layer
paste a paper of choice from the kit - I used paper 2
selection invert delete
select none delete the original layer
Click on blue square - selections ,select all , float , defloat
paste a paper of choice from the kit - I used paper 2
selection invert delete
select none delete the original layer
paste a paper of choice from the kit - I used paper 2
selection invert delete
select none delete the original layer
Add the pink glitter frame layer from the supplies - add a DS if you like
Click on black circle - selections ,select all , float , defloat
paste a paper of choice from the kit - I used paper 7
selection invert delete
select none delete the original layer
paste a paper of choice from the kit - I used paper 7
selection invert delete
select none delete the original layer
Add the white circle glitter frame layer from the supplies - add a DS if you like
Click on orange rectangle - image flip , selections ,select all , float , defloat
paste a paper of choice from the kit - I used paper 7
selection invert delete
select none delete the original layer
paste a paper of choice from the kit - I used paper 7
selection invert delete
select none delete the original layer
Add the green retangle glitter frame layer from the supplies - add a DS if you like
Place your maine tube - resize to your liking - potion where you want it
Xero Radiance with the settings you like - add DS if you like
Xero Radiance with the settings you like - add DS if you like
Now time to add our elements - resize to what you like
I used the following
Bows - Blue , Green & pink
Star Lollipops x 3 (rotated 2 of them)
Green Paw Print x 2
Pink Kitty
White Kitty Face
Bowl
Fish Bones
Purple Yarn Ball
Sparkles & Bubbles (not in kit)
I used the following
Bows - Blue , Green & pink
Star Lollipops x 3 (rotated 2 of them)
Green Paw Print x 2
Pink Kitty
White Kitty Face
Bowl
Fish Bones
Purple Yarn Ball
Sparkles & Bubbles (not in kit)
Merge your layers - Resize to what you want it to be - I resized mine 80%
Place your name where you like it - add a DS if you want
Add the ©Copyright Info and your License Number for your tube
Add the ©Copyright Info and your License Number for your tube
Merge Layers again then save as PNG to your pc
If you have any trouble with this tutorial please email me at
sweetshasta@gmail.com or pm me on facebook HERE
This tutorial was created on September 5 , 2012 by ShastaMarie
Any resemblance to another Tag or Tutorial is purely coincidental
Friday, November 11, 2011
*Christmas Bliss Elias*
9:37 PM |
Posted by
ShastaMarie (aka Heidi)
Christmas Bliss Elias
click on tag to see orgianl size
This tutorial was written by me ShastaMarie on 11/11/2011
All ideas are mine. Some supplies are provided by me.
Scrapkit used:
- Christmas Bliss by Scraps Dimensions
Template used:
- # 108 by Addictive Templates
Tube used:
- Ivelisse by Elise Chatzoudis
You must have a license number to use his work
Font:
- Inspiration
Any type of script font can be used
Effects used:
Xero - Fritillary
Tramages - Gradient/Spokes
Papers used:
paper 1
paper 2
paper 3
paper 4
paper 5
Elements used:
Bow6
Heart String
Holly 2
Pointsetta 2
Pointsetta 3
Snowman
Snowflakes (optional)
Sparkles
Supplies Provided
Lets begin!!!
Open up template, shift+D, x out orginal template and use duplicate template to work on.
Resize whole template 80%.
Go to your supply folder and paste each one of the glitter layers behind each layer of your template. When you get done it will look like you have a glitter frame around each layer. Each glitter layer already has a drop shadow on them.
Next choose which papers you are going to use for each layer. For each layer you have to go to Selections, select all, float, defloat, paste paper, invert, delete, select none. Do this for each layer of your template.
Next Cchoose which elements you will you. Resize them to your liking. I resized mine by at least 40%. You can make yours bigger or smaller depends on what you like. Potion them where you like. You can look at my tag for a guideline but everyone idea's are different. Add a drop shadow if you want to.
Next choose your tube the bigger one 1st, go to the 2nd layer and selection, select all, float, defloat, paste tube, put in position, invert, delete, select none. Then copy and paste your tube you just placed, mirror the image and move to the other side of the box. Opacity 70, Luminance.
Next choose the next smaller tube and do the same thing for the circle layer of your template. After you have Selection, select all, float, defloat, paste tube, invert, delete, select none, add a drop shadow to the tube, settings for drop shadow is 0-0-50-5, then add the Luminance to it.
Next part you can add some effect to your tag if you want to. I added the Fritillary effects to 2 of my layers using the settings 5-20-50-50. You can set your settings to what you like. I also added the Gradient/Spokes effects to one of the silver layerd square. It is all up to you what you want to add for effects in this area, as I said before everyone has different ideas :)
Next choose the pink layer of your template, go to the supplies and grab the word art and place it ontop of this pink layer. You can look at my tag for a guideline.
Next choose your tube again and place it in the middle of your tag, add a drop shadow if you want to. If you want to make is look like mine and have the soft look you have to paste your tube twice, make the bottom tube blured and then the top layer soft light. If you have trouble doing this just use one layer of your tube and add a drp shadow.
Last add your name where you would like it to be, add your snowflakes, sparkles, ©Info, License number, go to layers, merge, merge visible, save as a png file to your pc. And you are done!!
If you have any trouble with this tutorial send me an email at sweetshasta@gmail.com or you can message me on facebook or even on yahoo messenger at ahunny4u2n with any questions you may have and I will be glad to help you out.
Happy Taggin
Subscribe to:
Posts (Atom)